My Control Box does not turn on
If your Control Box turns on correctly, you should see two lights (blue and green) when you press the STOP button.
If not:
1. Check if the battery is charged. Consider replacing the battery if necessary.
2. Make sure the battery is properly connected. The connector (protruding part) should face towards the STOP button, and the connectors should align towards the bottom of the battery compartment.
Related Articles
When I connect to my Control Box, it says "Update Required"
This means that the firmware of your Neuro20 Control Box requires an update because it does not have the latest approved firmware. IMPORTANT! Neuro20 PRO Control Boxes should only be updated one at a time. Please follow steps 6-11 for each box ...
I'm trying to connect to multiple Control Boxes. I turned them all on, but when in Start Training/Assign Session Users, I only see one Control Box. How can I see the rest?
After pressing Start Training, in the Assign Session Users screen, you need to assign a user to a Control Box before being able to connect to another Control Box. This is because if all Control Boxes were to appear on the screen after you connect to ...
There is physical damage to the Control Box
If the Control Box remains usable, functions properly during sessions, and conducts stimulation effectively, you may continue to use it. However, if the issue affects its performance, please reach out to your sales agent.
I can’t connect to the Neuro20 Control Box
Follow these steps to troubleshoot the connection issue: 1. Check the Indicator Light on the Neuro20 PRO Control Box to ensure that the Control Box is on. Also, make sure the Control Box is in the designated range. 2. Check that the battery is ...
I don’t know how to activate my Neuro20 Control Box
Control Boxes must be activated within the app. Activation can only be performed by accounts with owner permissions. To activate Control Boxes, the owner needs to click “Manage Devices” and connect to the control box in question. Afterwards, a new ...